AirSense+

Air Conditioner control

Gas Sensor 

Power consumption monitor 

Motion Sensor 

Specification 

AirSense spec
4in1 Airsense back

 

Inside the box

usb cable.jpg
CT.png
In-Line Power supply.png
terminal block.png
Sensor Front.png

 

Features 

  • App for iOS and Android

  • Control and monitor Aircon from anywhere via Wifi or 3G/4G

  • Control Cold / Hot / Auto / Fan / Dry mode, Set Point and Fan 1, 2, 3, Auto

  • 2-way communication - status feedback and sync with aircon’s remote control

  • Automatic aircon brand selection via aircon’s remote control (setup with press of a button)

  • Compatible with major aircon brand with remote control (other aircon brand can be updated online)

  • Plug and Play – no need installation (just connect to power)

  • Measure Room temperature via built-in temperature sensor NTC

  • No need additional controller (standalone product)

  • Size: 6 * 6 * 1.5 cm (2.2cm include sensor)

  • Turn ON the air condition to its last status in memory 

  • Set Point Temperature Range: 16 ~ 32oc

  • Room Temperature range: 0 ~ 60oc

  • Radar Motion sensor – radius 7 meters range (14 meters diameter at 360 degrees)

  • Motion sensor settings when enter the room:

    1. Turn on air conditioner to last state

    2. Turn on air conditioner to a pre-set setting (temperature, mode, fan)

  • Motion sensor settings when leaving the room:

    1. Turn off air conditioner

    2. Conservation mode (pre-set the aircon to comfortable level for X time)

  • Air quality sensor will send alerts to App in case of high PPM levels of CO2, benzene, alcohol, sulphide, smoke and other harmful gases. Total 5 gas levels:

    1. Good: 0-600ppm

    2. Fairly good: 600-1100ppm

    3. Average: 1100-2100ppm

    4. Bad: 2100-3100pmm

    5. Very bad: 3100ppm and more

  • Power consumption:

    1. Current transformer – 5mA (50A). Size outer: diameter: 24mm, width: 11mm

    2. Power supply (inline) – 220VAC (2 wires) to 5VDC, 1A. (USB socket). Size: 44*32*24mm

  • Power consumption: 5VDC, 220mA

  • IR distance: Max. 6 meters at line of sight

  • Wireless Wi-Fi frequency: 2.4GHz ISM free frequency range

  • Wifi Communication distance: maximum 30 meters (at line of sight)

  • Enclosure: ABS plastic casing. White color or custom (MOQ)

  • Indoor use only

  • CE, EMC, FCC, IC, LVD standard

Compatible  

•    Aircool
•    Airwell
•    AUX
•    BlueStar
•    Carrier
•    Cetnral Air
•    Changhong
•    Daikin
•    Elco
•    Electra
•    Electrolux
•    Fujitsu

Compatible with most air conditioner models of the below brands (that has LCD on its remote control)

•    General
•    Gree
•    Haier
•    Hitachi
•    Hisense
•    LG
•    Midea
•    Mitsibushi
•    National

•    Panasonic

•    Pioneer

•    Pearl

•    Samsung
•    Sanyo
•    Sharp
•    Skyworth
•    Star-Aire
•    Tadiran
•    TCL
•    Toshiba
•    Yair
•    York

Installation 

There are 2 types of air conditioners wiring (depend on AC model), each required different installation:

1. Wiring from circuit board to inner unit to outdoor unit (normally on small size AC)

4in1 Airsense install

2. Wiring from circuit board to outdoor unit to indoor unit (normally on large size AC)

4in1 Airsense install

In both cases need to ensure current transformer is connected to the feed from circuit breaker as follows (only to LIVE):

4in1 Airsense install

System Layout IoT

system layout ariconet.jpg
APP Airconet Airsense
Airconet Airsense

How it works

Control 

Airconet control AC
Airconet Airsense
Sensor Front

Controlling from App sends command to Airconet via Server.

If Airconet received the command successfully, it will send feedback to the App which is displayed on the screen

Airconet control Split or Window air conditioners wireless via Infrared (IR)The Airconet has to be in eye contact with the air condition

Feedback

Airconet feedback APP
APP Airconet
Sensor Front

Controlling the aircon from its remote control will update the status on the App (via server)

It is full 2-way communication 

The Aircon's remote control is also used to automatically pair the Airconet with the Aircon brand (it learns all the IR codes)